Skip to main content

Store Hours: 10-6 M-F, 10-5 Sat, Sun Closed

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Spank Spike 25/30 Direct Mount Stem
$68.99
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
Easton EA70 Stem
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
TruVativ Descendant 35mm Stem
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
TruVativ Descendant Stem
$70.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction. - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - S.H.I.S. Stem Clamp Diameter: 28.6
3T Arx II Pro
$79.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
TruVativ Atmos 7k Stem
$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
Velo Orange Cigne Stem
$85.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Deity Components Cavity Stem
$94.99
The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail. - Machined from 6061 T6 aluminum - Wide 55mm faceplate for increased stiffness with wide handlebars - Rounded edges at all sides, corners, and angles - Reverse cross bolt system for increased clamping power - Flip flop design for increased range of height adjustment - Pro Installation Tip: Always run the steerer tube all of the way through the stem with a small spacer on top - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - Stem Angle (deg): 0 deg - S.H.I.S. Stem Clamp Diameter: 28.6 - Stack Height: 33 - Weight: 150 g
Deity Components Copperhead Stem
$98.99 - $104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering a strong steerer-mounted stem. Deity's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - Material: Aluminum - Length: 35mm or 50mm - Stem Angle (deg): 0 deg - Weight: 135g. (35mm); 161g. (50mm)
Syntace Force 109
$99.00
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Easton EA90
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy
Race Face Atlas Stem
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Race Face Turbine Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Spank Split 35 Stem
$99.99
- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized
3T Arx II Team Stem
$100.00 - $110.00
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)
FSA Energy SCR Stem
$104.00
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate
Race Face Turbine R 35 Stem
$109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Renthal Duo Stem
$114.45
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
FSA NS ACR Road Stem
$115.00
FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding. - Aerodynamic Cable Routing (ACR) - Low-profile frontal area - No rotation limit - Body and faceplate - 6061 T6 - Chromoly hardware - Specific frame and headset required - 31.8mm handlebar clamp diameter - 30mm fork clamp stack height - Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars
Syntace Flatforce Stem
$119.00 - $129.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Renthal Apex Stem
$120.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Renthal Integra 35
$120.95
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Thomson BMX Stem
$121.95
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
Thomson Elite X4 Mountain Stem
$121.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
FSA SL-K MTB
$124.00
- 3D Forged and CNC machined from AL7050/T73 - 3D Forged AL6061/T6 faceplate - 4-bolt cold-forged alloy faceplate - Cr-Mo hardware - 40mm fork clamp stack height - 162g (80mm)
ENVE Alloy Mountain Stem
$125.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware
Profile Design Aeria Stem
$131.00
Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.